Kamis, 23 Juli 2015

[smf_addin] Digest Number 3466[1 Attachment]

7 Messages

Digest #3466

Messages

Wed Jul 22, 2015 7:22 am (PDT) . Posted by:

"Kermit W. Prather" kermitpra

Randy, I tried the download of the work-in-progress version 7/8/2015 but its keeps saying the version is 06-08-2015
I even tried resting my system after the second download attempt, still not getting the 07-08 version.

I have updated to the zip file labeled http://ogres-crypt.com/SMF/Works-In-Progress/RCH_Stock_Market_Functions-2.1.2015.07.08.zip.
And the http://ogres-crypt.com/SMF/Works-In-Progress/smfGetGuruFocusItem-Full-Template.xls

I am getting #NAME? in every cell.

I opened one of my spreadsheets that I knew worked and I get Stock Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
As the version.

Just to be sure that I had not downloaded the wrong file I did it over again with the same results.
When I open the element definition file it shows

RCHGetElementNumber() Element Definitions as of 2015-05-27

But before I sent this I restarted my system and opened my spreadsheet and now I still get
Stock Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
As the version
And I still get #NAME? in every cell of the SMFGetFocisitem worksheet.

When I open the zip file it shows 7/8/2015 as the last modified date of the XLOA file.

Can you explain what is happening? Why am I getting the 06-088 version?

Might help if you add the version to the element file each time you update it.





From: smf_addin@yahoogroups.com [mailto:smf_addin@yahoogroups.com]
Sent: Monday, July 20, 2015 11:49 PM
To: smf_addin@yahoogroups.com
Subject: Re: FW: [smf_addin] Gurufocus - again - data from TTM column on Financials page


Did you exit EXCEL before you updated the XLA? EXCEL only loads add-ins at start-up time.
Check the version EXCEL is using with:
=RCHGetElementNumber("Version")
BTW, it takes me about 60 seconds to get the whole template calculated.
On Mon, Jul 20, 2015 at 8:43 PM, 'Jim Ranum' amt2100@gmail.com [smf_addin] <smf_addin@yahoogroups.com> wrote:

OK, I see I needed to update the xla as of 7/8/2015. Did that and re-Browsed to the Add-In file, etc.
But I'm getting #NAME in every cell of the smfGetGuruFocusItem-Full-Template.xls when I open it.
All the data is there for MMM until I Enable Editing. Then it goes fubar.
What am I missing?


Attachment(s) from Kermit W. Prather
1 of 1 File(s)

Wed Jul 22, 2015 8:50 am (PDT) . Posted by:

"Randy Harmelink" rharmelink

The only thing I can think of is that you're not updating the files in the
correct folder. Sometimes people have the add-in existing in multiple
folders, for whatever reasons.

I notice the folder name in your version stamp is a non-standard one (i.e.
C:\SMFADDIN). Are you perhaps updating the add-in in the standard folder
name (i.e. C:\SMF Add-in), and then not picking up the changes because your
installed version of the add-in is from the non-standard folder name?

On Wed, Jul 22, 2015 at 7:21 AM, 'Kermit W. Prather' kermitp@tampabay.rr.com
[smf_addin] <smf_addin@yahoogroups.com> wrote:

> [Attachment(s) <#14eb6252fc45f2a4_TopText> from Kermit W. Prather
> included below]
>
> Randy, I tried the download of the work-in-progress version 7/8/2015 but
> its keeps saying the version is 06-08-2015
>
> I even tried resting my system after the second download attempt, still
> not getting the 07-08 version.
>
>
>
> I have updated to the zip file labeled
> http://ogres-crypt.com/SMF/Works-In-Progress/RCH_Stock_Market_Functions-2.1.2015.07.08.zip.
>
>
> And the
> http://ogres-crypt.com/SMF/Works-In-Progress/smfGetGuruFocusItem-Full-Template.xls
>
>
>
> I am getting #NAME? in every cell.
>
>
>
> I opened one of my spreadsheets that I knew worked and I get Stock
> Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
>
> As the version.
>
>
>
> Just to be sure that I had not downloaded the wrong file I did it over
> again with the same results.
>
> When I open the element definition file it shows
>
>
>
> *RCHGetElementNumber**() Element Definitions as of 2015-05-27*
>
>
>
> *But before I sent this I restarted my system and opened my spreadsheet
> and now I still get *
>
> Stock Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
>
> *As the version *
>
> *And I still get *#NAME? in every cell of the SMFGetFocisitem worksheet.
>
>
>
> When I open the zip file it shows 7/8/2015 as the last modified date of
> the XLOA file.
>
>
>
> Can you explain what is happening? Why am I getting the 06-088 version?
>
>
>
> Might help if you add the version to the element file each time you update
> it.
>

Wed Jul 22, 2015 10:50 am (PDT) . Posted by:

"Kermit W. Prather" kermitpra

Once again, you are absolutely on target. I changed the default location a long time ago, However, I did not get rid of the default location.

I changed the link to the correct location and it works. I get premium in DEC00 thru Dec09 as I don't have a premium account on Guru.

Thanks again for correcting my SUE(Stupid User Error)

I don't really use this data but I like to test each template you load just to be sure everything still works.

Kermit

From: smf_addin@yahoogroups.com [mailto:smf_addin@yahoogroups.com]
Sent: Wednesday, July 22, 2015 11:51 AM
To: smf_addin@yahoogroups.com
Subject: Re: FW: [smf_addin] Gurufocus - again - data from TTM column on Financials page


The only thing I can think of is that you're not updating the files in the correct folder. Sometimes people have the add-in existing in multiple folders, for whatever reasons.
I notice the folder name in your version stamp is a non-standard one (i.e. C:\SMFADDIN). Are you perhaps updating the add-in in the standard folder name (i.e. C:\SMF Add-in), and then not picking up the changes because your installed version of the add-in is from the non-standard folder name?

On Wed, Jul 22, 2015 at 7:21 AM, 'Kermit W. Prather' kermitp@tampabay.rr.com [smf_addin] <smf_addin@yahoogroups.com> wrote:
[Attachment(s) from Kermit W. Prather included below]
Randy, I tried the download of the work-in-progress version 7/8/2015 but its keeps saying the version is 06-08-2015
I even tried resting my system after the second download attempt, still not getting the 07-08 version.

I have updated to the zip file labeled http://ogres-crypt.com/SMF/Works-In-Progress/RCH_Stock_Market_Functions-2.1.2015.07.08.zip.
And the http://ogres-crypt.com/SMF/Works-In-Progress/smfGetGuruFocusItem-Full-Template.xls

I am getting #NAME? in every cell.

I opened one of my spreadsheets that I knew worked and I get Stock Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
As the version.

Just to be sure that I had not downloaded the wrong file I did it over again with the same results.
When I open the element definition file it shows

RCHGetElementNumber() Element Definitions as of 2015-05-27

But before I sent this I restarted my system and opened my spreadsheet and now I still get
Stock Market Functions add-in, Version 2.1.2015.06.08 (C:\SMFADDIN; ; ; 1)
As the version
And I still get #NAME? in every cell of the SMFGetFocisitem worksheet.

When I open the zip file it shows 7/8/2015 as the last modified date of the XLOA file.

Can you explain what is happening? Why am I getting the 06-088 version?

Might help if you add the version to the element file each time you update it.


Wed Jul 22, 2015 4:32 pm (PDT) . Posted by:

pauloakoth

Hi guys,

Looking for 10- year Quartely data on Key Ratios for Companies on the DJINET. Any help in getting them?

Wed Jul 22, 2015 4:41 pm (PDT) . Posted by:

"Randy Harmelink" rharmelink

AdvFN may be your only option, unless you subscribe to GuruFocus.

On Wed, Jul 22, 2015 at 12:19 PM, pauloakoth@yahoo.com [smf_addin] <
smf_addin@yahoogroups.com> wrote:

>
> Looking for 10- year Quartely data on Key Ratios for Companies on the
> DJINET. Any help in getting them?
>

Wed Jul 22, 2015 6:08 pm (PDT) . Posted by:

wongkayau

Hello Randy,

Thanks again for the great tool.

In the past, I successfully downloaded data from this website
http://www.pbc.gov.cn/publish/html/2013s18.htm http://www.pbc.gov.cn/publish/html/2013s18.htm

However, it recently changed the template a bit (from landscape to portrait). Since then I cannot grab the data.

My formula is:
RCHGetTableCell("http://www.pbc.gov.cn/publish/html/2013s18.htm http://www.pbc.gov.cn/publish/html/2013s18.htm", 0,"AFRE<",,,,)

This is the simplest formula, aiming to get back "AFRE". Still no luck.

Could you please help?

Thanks a lot.

Cheers,
Ka Yau

Wed Jul 22, 2015 7:50 pm (PDT) . Posted by:

"Randy Harmelink" rharmelink

I also could not get your formula to work, nor could I get any meaningful
data from the URL using add-in functions...

...UNTIL I visited the website using the EXCEL Web Query dialog (although
IE would probably do the trick). I think they had some form of redirection
on the site that could only be bypassed once a cookie was updated. Since
the add-in isn't a browser processing the source code, but just collecting
the raw source code of a web page, it doesn't update such cookies.

So try visiting the website with the EXCEL Web Query dialog, then CANCEL
out, and run the smfForceRecalculation macro to force the add-in to get a
fresh copy of the web page. Hopefully, that will do the trick for you, as
it did for me.

On Wed, Jul 22, 2015 at 6:08 PM, wongkayau@yahoo.com [smf_addin] <
smf_addin@yahoogroups.com> wrote:

> In the past, I successfully downloaded data from this website
>
> http://www.pbc.gov.cn/publish/html/2013s18.htm
>
> However, it recently changed the template a bit (from landscape to
> portrait). Since then I cannot grab the data.
>
> My formula is:
>
> RCHGetTableCell("*http://www.pbc.gov.cn/publish/html/2013s18.htm*
> <http://www.pbc.gov.cn/publish/html/2013s18.htm>", 0,"AFRE<",,,,)
>
> This is the simplest formula, aiming to get back "AFRE". Still no luck.
>
> Could you please help?
>
For the Add-in, Documentation, Templates, Tips and FAQs, visit http://ogres-crypt.com/SMF
Diposting oleh EXCEL FEED LEARNING di 02.01

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)